Dye Staining and Polishing

CONCRETE DYES

Concrete Dyes are the latest technology in concrete coloring.

With the help of Nano Technology, Dye Stain transforms dull gray concrete into decorative, low maintenance finished concrete flooring.

At McCord Contractors Inc. we specialize in Dye Staining and Polished Concrete.

Dyed concrete floors offer a wide range of custom options and are ideal for commercial flooring. Concrete dyes have many more vibrant colors that can be blended to create an even greater color spectrum for your concrete flooring.

Dyes require no sloppy neutralizing or rinsing, and can be sealed almost immediately after application. This type of staining will bring character, personality, and beauty to your floor.

If you have inquiries regarding any of our concrete services such as our concrete polishing, concrete dying, or acid staining techniques, feel free to contact us and learn more about Dye Staining and Polishing and how we can help!

Benefits

• Unlike acid stains, the floor colors are not reactive and will continue to intensify with each application.

• Concrete dyes may be used on exposed polished concrete floors, as well as a cream finish polished concrete.

• Floor dyes are more predictable as to the final outcome of the color compared to acid stains which are reactive and somewhat unpredictable.

ADVANTAGES OF POLISHED CONCRETE FLOORS

Polished Concrete floors has become one of the logical choices because of the great value and durability it delivers for Retail and Commercial facilities.

Our concrete polishing works well for industrial applications, creating a smoother and more level surface that reduces driver fatigue, wear and tear on the forklift and tires as well as minimizing load shift. In addition, we also fill cracks and joints found in concrete slabs and remove excess material to produce a smooth joint.

Benefits

• Cost savings

• More resistant to high foot traffic

• Less maintenance and longer extended service life

• Resistant to moisture transmission issues

• Increased light reflectivity

• Can be stained

Four levels of concrete floor polishing
and the degree of shine and results you can expect

• Level 1 (flat)

  A level 1 ground polish usually can be obtained by stopping below the100-grit resin bond. When you look directly down at the floor, it will appear somewhat hazy with little if any clarity or reflection.

• Level 2 (satin-low sheen)

  A level 2 honed polish is obtained by stopping at the 400-grit resin bond, producing a low-sheen finish. When you look directly down at the finished floor and at a distance of roughly 100 feet, you can start to see a slight overhead reflection. This grit level produces a low-luster matte finish.

• Level 3 (semi-gloss polished)

  A level 3 polish is achieved by going up to an 800-grit or higher diamond abrasive. The surface will have a much higher sheen than that of level 2 finish, and you’ll start to see good light reflectivity. At a distance of 30 to 50 feet, the floor will clearly reflect side and overhead lighting.

• Level 4 (high gloss polished)

  This level of polish produces a high degree of shine, so that when standing directly over the surface, you can see your reflection with total clarity. Also, the floor appears to be wet when viewed from different vantage points. A level 4 polish is obtained by using at least a1500-grit resin-bond diamond pads, up to 3000-grit, or by burnishing the floor with a high-speed burnisher outfitted with specialty buffing pads.